Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
261 Posts
Please fill out your profile so we know what car you have. I will assume you have a 65 from your handle. Unless you have unusually long heater hoses, it will be necessary to drain the coolant so they can be disconnected. This is required because the blower motor is sandwiched between the heater box and firewall. if you have never had it apart, I would suggest installing a new foam seal kit as well. Not very hard if you have the heater case out anyway. Good Luck!!!

Brian
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top