Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
923 Posts
A hacksaw. If they are that bad, replace them. You probably have rust on the inside of the lines if they are that bad on the outside. You can make your own or buy prebent stainless steel from a vendor like Classic tube. I was very happy with there product. the Stainless steel are great, but you can't make them, you can't make the flares. You could buy tubing from whetneys and bend your own. I tried that and wound up buying from Classic tube.
Dave
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top