Vintage Mustang Forums banner
1 - 3 of 11 Posts

· Registered
Joined
·
419 Posts
Discussion Starter · #1 ·
Well this is the third time now in about 3 months, I go and start the car, and it keeps on cranking. The starter keeps running even after the key is in the OFF position, I wrapped on the Starter Solenoid with a scewdriver and it stopped. I replaced the solenoid everytime this happened, so its the third time now. It only happens once, and then for the rest of the day it starts fine and dandy.I have been getting the solenoids from Autozone, maybe time to switch brands?? Could it be anything else? Thanks for any input.
 

· Registered
Joined
·
419 Posts
Discussion Starter · #10 ·
Thanks for all of the help gang! I ran to Napa after work today and picked up a new ignition switch and starter soilenod. Hopefully thier parts are better quality and will hold up. Got them installed and we'll see what happens down the road. Hope that takes care of it. Thanks to all who helped! James.
 

· Registered
Joined
·
419 Posts
Discussion Starter · #11 ·
I got the new napa ignition switch installed and have been using it for a few days, it sure feels different than the old one, lots firmer and turns smoother, that may of been the problem I am hoping. At this point though, I love Autozone, but from now on I think all my major parts are going to be from Napa. Thanks again for all who helped me out with this. James
 
  • Like
Reactions: Grabber70Mach
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top