carb ID C6ZF-E 4100
Join the discussion
Recommended Reading
-
Clutch pedal issues
Vintage Mustang Forum66 289 HiPo. 4 speed manual I was driving around the other day near home and suddenly could only get into 4th gear. I parked car and at this point clutch pedal went to floor. Pulled out the z bar and it was cracked bad enough to flex so I ordered replacement. Put it in but pedal won't return...- 17
- 371
-
Cowl difference.
Vintage Mustang ForumHello everyone. I recently purchased a cowl assembly for my 66 convertible from CJPP. I noticed there is an indented section on drivers side on my old lower cowl with 2 screw holes that is missing from my new lower cowl. Not sure what this is for and why it’s missing from the new cowl. Any...- 16
- 477
-
Is this 69 Mach 1 R code worth 28K?
Vintage Mustang ForumSaw this and was wondering what it's really worth? https://albuquerque.craigslist.org/cto/d/deming-1969-mustang-mach-fastback-428/7080620094.html sandybob- 0
- 17
-
Erratic temperature issue
Vintage Mustang ForumWith help from this site and Huskinhano, I put together a 1999 GT40P with Ford E303 cam and TFS spring kit. The engine runs very well. My issue is that my temperature is erratic. It will slowly go to 180, then shoot up almost immediately to 230 then down to 160 and repeat, ad nauseum. It’s only...- 16
- 289
-
T5 Swap 1994 Bellhousing Starter Fit
Vintage Mustang ForumGuys, I'm having issues with original OEM starter fit with my T5 swap. the Trans and bellhousing are out of a 1994 5.0. I have a 1965 to 1973 scatter shield that matches up with the bellhousing (luck I guess) but the OEM starter is clocked too much and the case touches the flywheel so I can't...- 10
- 177
Join now to ask and comment!