Vintage Mustang Forums banner
1 - 1 of 2 Posts

· Registered
1,022 Posts
Are you talking about a console, or the shifter base? I have the full length console, but I'd imagine the smaller one is similar in the removal; take the screws out from around the edges of it and lift it out, pretty basic... If you're talking the little black+chrome base around the shifter, it has screws in the corners you have to take out and then you have to take the shifter handle off by taking out the little allen screw in the back part of it down near the shaft. Good luck!


'72 Mach 1 || '90 Talon TSi AWD
"Thats not a leak, my car's marking its territory!"
"If you've done it, it ain't braggin'." -Roy Rogers
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.