Vintage Mustang Forums banner

1 - 19 of 19 Posts

·
Moderator
Joined
·
2,695 Posts
Discussion Starter #1
Hello all.

There has been some interest from some members, and some area vendors
to create a list of local people or businesses that sell vintage Mustang
parts locally.

If you would like to add an entry to the list, please reply to this thread.

Thanks,

-Zim
 

·
Registered
Joined
·
1,420 Posts
Here is some of what I have:
- 70 highback tan deluxe buckets and rear coupe seat- seats will need to be recovered and the buns replaced on the buckets - $150
- 70 highback red mach 1 seats with rear seat- good driver condition- $250
- 70 deluxe door panels- 1 red(d), 1 tan(p) $200 pair or $100 each
- Complete 3 speed excellent condition, new seals. Comes with trans, bell housing, trans mount,flywheel, pressure plate, new clutch, shifter, shifter linkage, new boot with chrome trim,Z-bar and springs- $250
- passenger door- good solid frame needs to be reskinned - $75
- 8" rear end 3.00 traclock complete drum to drum - $150
- bolt in door glass- coupe- $100 each
- sport mirrors-70- $125- pair
- 70 passenger headlight bucket-all tabs- $150
- 69 passenger headlight bucket-all tabs- $150
- trans crossmembers $20 ea
- 70 complete wiring harness(underhood,dash,lights) - $200
- passenger dash panel - black- $25
- set of horns-media blasted and painted- $75
- 70 tail lights with housing, lens and trim- $20 each
- 70 fenders $20-$50 each (have rust)
- kick panel vents - $40 pair
- Coupe interior quarter panels-tan-$50 pair
- Fastback interior quarter panels $175 pair
- 70 fastback quarter extensions $65 each
- 69 coupe/vert quarter extensions- $20 each
- 70 coupe/vert quarter extensions- $20 each
If you see something you are interested in let me know. If there is something you need that is not listed, let me know. I would also be interested in trading for parts I need for my cars.

Thanks for looking!
 

·
Registered
Joined
·
1,230 Posts
Looking to turn your non-running Mustang into a fun and reliable performer over night? I've got just the thing for you:::
For sale:

1968 C-Code 289:
• Approximately 18,000 miles since rebuild
• Block bored 0.030” over
• TRW Forged flat top pistons (9.5:1)
• Stock connecting rods
• Stock crank, re-ground and re-balanced
• Stock cast iron heads with new valves, guides, lifters and pushrods. Stock springs and rockers.
• Comp cams Hi-Energy 268H-8 cam (I have the card)
• Eagle Headers
• Edelbrock Performer RPM intake manifold
• Holley 4160 4V carb (manual choke)
• Mallory Unilte distributor
• MSD wires *
• MSD coil*
• COBRA valve covers (natural)
• Stock waterpump*
1968 C4 Transmission:
• Approximately 18,000 miles since rebuild
• Professionally rebuilt by TSI Transmissions of Chicago (fully balanced & blueprinted)
• Full manual reverse valve body (I still utilized the stock shifter; just a different order: PRN123
• TCI Streetfighter torque converter
• Includes external transmission cooler
• Includes HD stainless steel cooler lines*
Also for sale:
• HD 3-Core Dessert radiator for small block*
• Stock style Motorcraft alternator with brackets


* Denotes parts that were replaced in the summer of 2003 including all belts and hoses

The engine and transmission are still in my stang (pictured below) If you're interested, you can drive it to see how it runs, but hurry, I'm planning on pulling the motor and trans right after Christmas. I'd love to get $1700 for all that is listed above, but I'm willing to entertain any reasonable offers. I'd like to sell everything together, but if I get no takers I'd be willing to seperate.
 

·
Registered
Joined
·
620 Posts
What are you replacing the 289 with? Just curious
 

·
Registered
Joined
·
1,230 Posts
I know it sounds crazy, but I've always wanted a big block, so last weekend I put down a deposit on having a 428 CJ built by Keith Craft racing. My brother is having them build a 427 for him, we got to talking, one thing led to another, and I placed an order for the CJ motor. A subsidiery of theirs also does drivetrain installations (for Cobra kit cars) so I am currently in negotiations with them for getting me set up with Tremec TKO 5 speed. It'll be a big change for the car but it should really increase the fun factor. I'll post more details if anybody's interested.
 

·
Registered
Joined
·
620 Posts
Sounds like a fun project. Keep me posted on how it goes and let me know if you need any help.
 

·
Registered
Joined
·
188 Posts
I have the gas pedal linkage from my '67 auto car. I'm converting to manual, Anybody have a manual linkage they want to trade before I cut the kick down arm off? Thanks, Kevin.
 

·
Registered
Joined
·
9,780 Posts
For sale: Spare stuff I know I'll miss....
65/66 full console, coupe/fastback car. Black with auto trans centerpiece. Complete with chrome, ashtray, wiring, light inside compartment. Whats wrong with it? Usual Illinois pitting on the chrome, bottom of ashtray is rusted, Price? $350.00
One 5 X 15" Ford Steel wheel $20.00
65/66 black standard bucket seats with tracks, comes with the rear seat sections too. Adjusters go with, needs new seat covers $100.00 for all
3 65 hubcaps and 4 66 hubcaps. not perfect, 30 for all.
65/66 head light trim, including the headlight bracket plates that hold them to the fenders $60.00
Grill lower sheet metal, and the 3 peices of chrome that goes onto it (66) $40.00
65- 2 front door panels (standard) red, no rips but the chrome has peelsoff of the piping (so paint it) $30.00 both.
Oh, I still have those Tri-Y headers and exhaust pipes and turbo mufflers (please don't ask to separate) 65/66 coupe/fastbacks $125.00

I'll post this stuff on the big board in 2 weeks, thought I'd give my fellow Chicago VMFers first wack.

Email me at [email protected]
 

·
Registered
Joined
·
1,230 Posts
Thanks to every body who inquired about my engine and transmission for sale. They have been sold!
 

·
Registered
Joined
·
247 Posts
we are moving soon so i have to get rid of my extra parts, heres what i have:

65-66' coupe back seat top&bottom black $50.00 obo

65-66' hood kinda rough one corner needs some work $10.00obo

header mufflers flowtech "purple hornies" jegs pn#387-50231
i tried them on my coupe but to much exhaust for my motor $50.00.

2 1/2" flowmaster series 50 like new they were tack welded on but not used $70.00 obo

i also have a mess of power tools i don't use but i will have to go through them first i know i have:
craftsman drill press with stand $35.00
cordless drills $10-20
porter cable band saw like new $50.00

and i'm sure i will find more the deeper i dig
 

·
Registered
Joined
·
828 Posts
I have the following parts for sale:

68' Original Ford Fenders rust free, $450.00

68' GT Grille w/Fog Lights and trim $275.00

68' Four Speed Console Complete, BLACK $600.00

67'& 68' Fastback Trunk Lid $285.00

67'& 68 Coupe or Convert Fiberglass trunk lid w/end caps $400.00

67'& 68' 8'' rear end drum to drum 3.00 gears War case with Posi $450.00

9'' Lincoln Versaillis rear end with disc brakes $400.00

9'' Rear end housing w/axle and backing plates $250.00

289 Heads W/2BBL intake, date code Oct. 1966 $100.00

69' 302 Engine. Rebuilt and sitting on engine stand $800.00

71' 351 Fan Shroud $125.00

Please email me at [email protected]
 

·
Registered
Joined
·
828 Posts
Also, have the follwing parts for sale:

68' GT390 & std 428 Heads - C8AE-H 14 Bolt Exhaust. Fresh rebuild $350.00

69' 428SCJ & GT500 Heads - C8OE-N 16 Bolt Exhaust. Nice take off's $800.00

69' Big Block FoMoCo original radiator (AUTO) $250.00

Ford - Aluminum PI Fe intake, $350.00

67' & 68' Cougar Front & Rear Valances.

67' & 68' Fastback Fold down rear seat assembly.
Needs restoring) $450.00

67' & 68' Mustang Coupe/Convert trunk lid. $100.00

68' Cougar XR7 Auto console, $300.00

67' Cougar 4-Speed Console, $400.00

67' Mustang Auto Console, 375.00

66' Mustang Auto Console, $300.00

69' Mustang/Cougar Convert back seat, $250.00

This is a sampling of the parts I currently have from 1965-1970 mustangs. I have **MANY** other odds/ends parts. I'll be listing all of the above parts and many more on [censored] very soon, so if you need anything in particular, please email me at [email protected]
 
1 - 19 of 19 Posts
Top