G
Guest
·Guest
Joined
·
0 Posts
I have a chance to buy a cherry Grenada with an H code engine and a B code rear. What is the B code ratio and is it a tration loc?
Code breakers, I need a quick response please!
Join the discussion
Recommended Reading
-
exhaust kit or custom?
Vintage Mustang Forumlooking at installing a new dual exhaust system on my 68 289 that i just recently put a set of tri y headers on, was wondering if anybody has had a good experience with kits from summit, flowmaster, etc. or if i should just look at having a local muffler shop install a custom system- 20
- 659
-
5 Bolt 6 Bolt engine-bellhousing ???
Vintage Mustang ForumI heard of a 5 bolt engine and bellhousing and a 6 bolt engine and bellhousing today. For 289 what are the application of these engines and bellhousing?- 24
- 5K
-
heading to the dyno on Sat...
Vintage Mustang ForumSo I'm taking the 66 to the dyno on saturday. Old guy, neighbor of my uncle who's been tuning cars all his life. He wants me to bring my Holley 600 CFM carb and my Summit 500 cfm carb and see which one is better. Since I've never done anything like this before is there anything I should be on...- 9
- 141
-
ophthos · updated
-
AC Condensor Testing--How Much PSI should be used.
Vintage Mustang ForumRedoing the 65 engine compartment and discovered I had no R12 left in the AC system. Part of chasing down the leak is I can test the condensor now that it's nearly ready to lift out. I can pressure it up to test for leaks once its out but I don't know how much pressure it normally operates on...- 19
- 251
-
I6 to 8” brake upgrade
Vintage Mustang ForumI’m taking a slow road to a V8 upgrade eventually in a 65 FB. I’ve got a 66 8” I’m ready to install but it doesn’t have a brake line on it. I figure I should get a new line, but there was a block on the left of the 4 bolt - what part is that? Off the block is the feed from the front of the...- 5
- 133
Join now to ask and comment!