saw some on ebay today., i could not tell from there picture, i guess a
person could email the seller. but the picture made it look like they had
some kind of metal inner lineing to the plastic cups. mine in my 68 coupe
have no metal in them.
hope this helps
douglas rhine of nebraska
the man with the sad dog face
I have been chipping away at installing a quarter skin on my 68. I have everything trimmed and fitted up pretty well but the door gap is giving me problems. It was fine and adjusted before i started this part of the project. Now it seems that the top and bottom i can slide my paint stick in but...
I really like the way the 69 mustang hood scoop that has the turn signals looks. Has anyone ever installed the bolt on 69 mustang hood scoop on a 66 mustang hood. If so did it bolt on flush or did you have to modify it
I am almost ready to install my 351w, it's attached to an AOD. I plan to jack up the rear of the car and install the combo using a MAC's engine pivot plate. I've got some dense foam packing I'll tape in the engine bay to help avoid scratches but I am really hoping the pivot plate will give me...
8” Rear on this 68 Coupe and I was wondering if this front part of the carrier where the pinion is (smaller one with 3 bolts showing in photo) Has it’s own gasket underneath and can unbolt without taking the entire carrier and axles out.
It appears it’s starting to seep a tiny bit now that...
Since my car is in pieces and I’m going to rebuild the 289, I need to get some ideas on how to “dress” the engine bay. I don’t want to end up with an abomination of blue, red, yellow, black and chrome - so pop your hoods!
I’ll get it started ;)