I want to open these fake ducts for airflow use for brake cooling. If anyone has a photo of the application please post a reply. It should be straight forward but I would like to see examples. Yes, I searched the internet but have found none.
![F172A1F7-D8F5-4F50-B1B6-1C59B2DDF801.jpeg]()
Cooling ducts
1 - 3 of 3 Posts
Joined
·
372 Posts
I opened up my ducts not for the brakes but for air intake to my manifold. This required making a transition mounted behind the opening and then ducting it into the engine bay where it was connected to a custom air cleaner. I have lost all of my past photos of this build but here is a youtube clip that was made at the All Ford show at Knott's Berry Farm.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
2004 mustang rear seat
Mod and Custom ForumGood morning guys, today's project 2004 mustang rear seat. Why it has fold down trunk access and a spot for 3 point harnesses. Here is a pic of the progress so far.- 3
- 79
-
[email protected] · updated
-
Struggling to get my 5.0 EFI running...
Mod and Custom ForumFinally got to a point where I could turn the key on my 5.0 conversion in my 66 Mustang. I had to cut it short as the day ran out, but unfortunately couldn’t get it to fire. Scratching my head a little, but wondering if anyone can suggest anything to try. I haven’t done a lot of troubleshooting...- 25
- 2K
-
TheDraytone · updated
-
MSD Box location
Mod and Custom ForumThinking about mounting the MSD box behind the fender. There appears to be plenty of room and there are no user adjustments for it. I've used them for years and have never had a problem with them. I've run out of room in the engine bay. The tape is there just for mock up.- 24
- 509
-
j persons · updated
-
Overheating, street Mustang '65 with a 331 Stroker
Mod and Custom ForumHi, I have a 1965 Mustang with a 331 Ford Stroker engine with overhetaing problems after an hour or so of driving time. Set up is a 2 row, alluminum radiator with an thermoelectric fan which I believe is kind of small. Has anybody had any overheating problem after getting a stroker engine ...- 12
- 494
-
New custom interior
Mod and Custom ForumSo much time has elapsed since I started having my 67 vert restored. After almost 2 yrs, the car is finally to a point where I can see some light at the end of the tunnel. The car started its journey at a resto shop and 2 weeks ago it was finally to the point it could be driven down the road to...- 22
- 700
-
67CustomStang · updated
Join now to ask and comment!