Vintage Mustang Forums banner

Cowl Alignment Help Needed

1K views 12 replies 8 participants last post by  RudeMan 
Don't forget about your hood. You want the beauty lines on the hood to line up with the lines on your cowl. I'd just test fit/mock it all together before you start welding anything. And I'd weld the lower piece in first. Then the top. If you weld them together then try to fit in you don't have any wiggle room now for slight adjustments.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top