Vintage Mustang Forums banner

Cowl Alignment Help Needed

1K views 12 replies 8 participants last post by  RudeMan 
as stated, there are alignment holes for the lower cowl install along the hood edge and both sides. Weld that one in first, then the upper. Be careful to ensure the wiper arms are centered in their respective holes. As a helpful hint- make sure to remove the lead from the lower corners of the windshield before welding... ask me how I know... lol
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top