Car has been sitting in my garage for the last 20 years and has not been started.
I‘m replacing the fuel system and would appreciate some advice and tips on prepping the engine before firing it back to life.
My Best To All
65 Convertible disc/drum setup ,just had new dual reservoir m/c and booster installed , new rotors and calipers and lines ,new wheel cylinders and shoes on the back.
Struggling with long peddle travel and soft stopping. Have bled several times and adjusted the rear brakes as much as my mechanic...
My car has a TCI C4 with a PA deep, finned pan. I have a PTC Race converter. It seems to flash to around 4k RPM. I've not yet done a brake stand. But without question it's probably putting out more heat than stock. I do have a trans temp gauge but it's not working and I have yet to figure out...
I have a 6cyl Ford Mustang convertible assembled at Dearborn MI in February 1965.
The Left fender is stamped with a triangle and 2 01 D3 on top.
The Right fender is stamped 6330 D? on the top and in two sections towards the rear stamped 5 27 2D and 5 27 D2?
Would these be original factory...