Decoding Parts Tags

1 - 1 of 1 Posts

Guest

Joined Jan 1, 1970

0 Posts

Discussion Starter • #1 • Jul 24, 2002

Is their either a good book or a web site that has all the numbers for decoding what part belongs to what car and year , for example tranny tags or head numbers or rear end tags .
Thanks Willy1

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Cold start and fast RPM

Vintage Mustang Forum

With this car being my first carburetor engine vehicle, I finally found the sweet spot with cold starts. Tap on the gas pedal 3 times and start the car. The auto choke does its job. My fast RPM sits at 1,600. I give the gas pedal a tap after a minute and it idles at 900. I'm wondering if 1,600...
- 0
- 0
- Razzle1980 · updated a moment ago
1967 coupe/fastback versus convertible full rear frame rails

Vintage Mustang Forum

I am starting repairs on my 1967 fastback. I will be installing new full rear frame rails with torque boxes and I plan on adding the convertible inner rockers. Is the only difference between fastback and convertible rear rails is the width of the torque box? I am wondering if it would make...
- 0
- 0
- W
  wils1514 · updated a moment ago
End of Production for 1969

Vintage Mustang Forum

Hi everyone, I was wondering if anyone on here knows when production stopped for 1969? Even more specifically, in San Jose. I had heard that it was usually mid July 1969 when they switched production to the 1970 model year, but never heard of an exact date. My Mach 1 was built on July 12, 1969...
- 8
- 155
- bmcca7 · updated 16 mins ago
Louver tabs

Vintage Mustang Forum

I assume these are tabs to mount a window louver. Are these original? Do they still make a louver that uses these? How do you remove them, are they hooked on the glass?
- 4
- 65
- [email protected] · updated 21 mins ago
Front spring setup option for my 68 Fastback GT?

Vintage Mustang Forum

Im pretty sure my front springs are original. They measure .670 rod dia. I plan on doing the 1” Shelby drop and running 17” rims all around. I have a 302 going in with aluminum heads and intake So there’s a fair amount of weight reduction. I have ordered full roller perches from open tracker...
- 5
- 132
- D
  Dans68 · updated 23 mins ago