Vintage Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2,834 Posts
Discussion Starter #1
Guys,

What are your thoughts on the "stock", optional 65 fan shroud vs. the much more expensive 3.5" deep one?

Want to go with stock as I have a non-super modded engine. Would like to get aluminum heads and end up with around 300 hp eventually.

Thanks!
 

·
Registered
Joined
·
3,277 Posts
It doesn't matter what engine or horsepower you have. You want the fan shroud to be as deep as the center of the blade.The shroud should cover half the fan blade.
 

·
Registered
Joined
·
7,107 Posts
It doesn't matter what engine or horsepower you have. You want the fan shroud to be as deep as the center of the blade.The shroud should cover half the fan blade.

+1 with tooponies and it greatly improves the efficiency, if the blade is within an 1" of the rad, as well.
Happy Motoring!
 
1 - 3 of 3 Posts
Top