[Dinosawnj]

I need to replace my master cylinder. Excluding the normal places (CobraAuto, SSBC, MPBrakes, etc..),
does anyone have an application for a Ford disc/disc master with a 1 1/8" bore and driver side line fittings.
Thanks,
Bob.

 

[Huskinhano]

Have you tried looking at truck applications? A lot of them are using 4 wheel discs.

 

[Dinosawnj]

I went down to the local Mom&Pop parts store and their new brake books don't give the same info they used
to (Bore size, dimensions, outlet configuration, spacing of mounting flange). They carry less stock of the old
stuff then they used to, some looking in the boxes on the shelf is not a good source either.

Bob.

 

[GypsyR]

I don't know of any with left side fittings off the top of my head, maybe someone will chime in who has used an 85-6 SVO M/C.
Unless you dead set on driver's side lines, you could try this:
Mark VII

 

[Dinosawnj]

Thanks, the Mark VII was my backup (I don't mind making up new lines, but I just made the M/C to distribution
block lines 2 years ago).
Bob.

 

[redden68]

I don't remember the exact year, but look at 3/4 ton Ford trucks from late 70's to early 80's.