Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part August's Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
3,595 Posts
Put the race in your freezer for at least 30 minutes. Take a torch, or propane burner, and heat the hub. Doesn't have to be red hot, just heated up all the way around. Take your time doing this so it is warm all the way through to the inside. Shut your torch off and quick get the icy race. If it still won't go in, it's the wrong size. The contraction/expansion of metals due to cold/heat will give you that precious few thousands that you need. To start it, make sure it's square, and hold a piece of 2X4 against it. Smack the 2X4 in the center with a hammer, and it should start. Once it's started, you're almost home! ::
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top