G
Guest
·Guest
Joined
·
0 Posts
64.5 / 289 - looks like there is an oiling port on the distributer.Didn`t see anything in the chiltons or the owners manual.What intervals do you oil and what type.Thanks,Lee
Distributer Oil Port
1 - 4 of 4 Posts
Joined
·
2,466 Posts
I had an old Hipo distributer with the oil port. I can't say that I have seen any information on service intervals for this item.
I used the same weight oil as the engine and gave it a squirt every 1000 miles or so.
I used the same weight oil as the engine and gave it a squirt every 1000 miles or so.
Back in the day.....Tune-ups were every 5k. That included plugs, points, Oil change, etc. The dizzy was also lubed with 30w motor oil when the points were changed. If you can find an old squirt oil can they worked great for this. Man that brings back some great memories /forums/images/icons/smile.gif
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
To flare or not to flare...
Vintage Mustang ForumConsidering flaring my ‘66 coupe. I like the idea of a vintage racer style, terlingua-esque, road racer thing... I found a place that makes hand rolled, steel flares and I temporarily tracked them on (see below). But I’m having trouble telling if I will like it. I think it is vital to be able to...- 8
- 71
-
ianellis · updated
-
More Kudos for Dan Nolan @ The Mustang Barn
Vintage Mustang ForumI recently bought a used distributor off of Ebay for my '66 200 3-speed with the intent of having it rebuilt by Dan Nolan after reading such rave reviews. When I got the distributor, I found that after some cleanup, it seemed to be in really good condition with even a good Motorcraft vacuum...- 0
- 0
-
Fitch · updated
-
Shock tower reinforcement plates worth it?
Vintage Mustang ForumAre those reinforcement plates worth it? Do they add valuable strength to the shock towers if you already running an export brace and money Carlo bar? https://storeimages-westcoastclassic.netdna-ssl.com/dc/e5e2/1368056421_w.jpg Sent from my iPhone using Tapatalk- 5
- 157
-
ianellis · updated
-
disc drum conversion
Vintage Mustang ForumHi Guys I have a 65 Mustang that the previous owner converted from drum drum to disc drum. Looking at the master cylinder, I see that the larger front outlet (1/2”?) is connected to the rear brake line, and the smaller rear outlet (7/16?) is connected to the front brake line. Is this the right...- 12
- 394
-
Source for connectors and terminals (light switch, washer pedal)?
Vintage Mustang ForumHi all, I was thinking I would maybe redo all the wiring in the car in the near future (And get rid of EEC-IV and move on to something more modern and simpler). When I installed this last wiring harness (just a universal wiring harness, which is what I will be doing again) I reused the...- 5
- 102
Join now to ask and comment!