Vintage Mustang Forums banner

Does anyone else have problems with side windows?

1K views 7 replies 5 participants last post by  khodgens 
What area is not lining up? Is the window coming up straight or is it on a bit of an angle? Can you move the window by hand, meaning can you grab the glass and lift it any? If you can lift it, the window mechanism is worn out.If you cannot move it then we will look elsewhere for your problem. As for the angles, at the bottom of the door are a couple of bolts that adjust the in/out tilt of the window.On the side of the door where it catches the door latch are two more bolts that adjust the forward /backward tilt. On the 69, I know you have to be careful not to have the window come up to far or you will take out a few chips along the top, done that one as well. .As the other poster mentioned , there are also rollers that can be replaced in the scissor channels but check out the other areas first before removeing those.
Good luck
Don
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top