Door latch ?
1 - 7 of 7 Posts
Joined
·
785 Posts
They were cadmium plated, kind of a silver ish color
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
Joined
·
33,834 Posts
Yep, that looks like correct cad plating.
Joined
·
33,834 Posts
The one on the left.
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
A/T-M/T brake pedal
Vintage Mustang ForumIs the manual trans brake pedal the same as the auto brake pedal except for the size of the foot pad? I can't find a replacement brake pedal anywhere ( NPD, Autocrafters, etc.) Haven't looked on ebay yet. If its the same can I just cut the foot pad down to size or are the angles different?- 10
- 240
-
ophthos · updated
-
Aluminum Prebuilt Heads or rebuild Original Heads
Vintage Mustang ForumI am rebuilding the original 289 engine in my 66 Mustang Coupe. I am rebuilding as a Hi Po, 4V holly carb, dual plane intake manifold, Hi-Po exhaust manifolds, 2.25 exhaust pipes with turbo mufflers with resonators, mild Competition Cam. Which would be better/ cheaper? Have machine shop...- 27
- 641
-
CJ pony parts........
Vintage Mustang ForumWell guys I’m going to honest, I have purchased a lot of parts from them in the past 5 years. Thousands of dollars of parts actually. Only a few issues and they took care of them fairly quickly..I have ordered parts from NPD in the past and just received weatherstrip[ping from them because CJ’s...- 1
- 32
-
66Ccode · updated
-
Need help ASAP plz finding Engine Casting Number 67 GT350
Vintage Mustang ForumHey fellows, Question, can someone please provide 2-3 pictures if possible as how I can find the engine casting number of a 67 GT350 (or 67 Fastback/GT/GTA, etc) I assume they are on the same spot. I keep reading behind motor starter, I look everywhere and find nothing. Ideally if you can...- 8
- 86
-
Options on Rear Wheel Rubbing
Vintage Mustang ForumI could use some opinions on correcting some tire rub on my '67 Mustang. After some research, I found most went with a 17"X8" wheel on the rear of a '67 with 4.5" backspacing. I searched around and purchased a set of four Billett Specialties 17"x8" rims for my 1967 Coupe with 4.5"...- 12
- 175
-
67TexaStang · updated
Join now to ask and comment!