DROOL!!!!
1 - 7 of 7 Posts
Joined
·
1,103 Posts
Edit:
The speedo pic is interesting, 25,250 above "MPH"
I linked it to the pic, but the link contained the word e'b'ay and thus didnt work!
Gary
The speedo pic is interesting, 25,250 above "MPH"
I linked it to the pic, but the link contained the word e'b'ay and thus didnt work!
Gary
Joined
·
1,953 Posts
Didn't sell. /forums/images/icons/shocked.gif Wonder what the reserve was set for?!?!
Sad thing about a car like that is you would spend 99% of your time talking about how it is not a kit car. You would end up getting pissed off at all the ignorant people saying "my buddy got one of those with a 5.0 engine in it".
I hope that car can fine a nice museum to sleep in for another 40 years.
I hope that car can fine a nice museum to sleep in for another 40 years.
G
Guest
·Guest
Joined
·
0 Posts
Nope, just a $40 insertion fee.
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
289 timing issue
Vintage Mustang ForumThis one has me very confused. Built the engine years ago. 289 bored out, stock pistons, afr 165 heads, comp cams xe268h, weiand stealth, holley 670 street avenger, ignitor 3 module, headers etc. The issue I'm finding is I can not get the engine to run right with 12-18 degrees of base timing. I...- 2
- 0
-
66stang289ci · updated
-
Power antenna for 1964-1966 Mustangs?
Vintage Mustang ForumAnyone ever installed a PowerAntenna in one of the early classics? The previous owner inadvertently broke off the mast of the non-power antenna of my 66. I have been holding off replacing this, because 1) the radio (original) is not hooked up anyway (no speakers either), and 2) I really like...- 17
- 87
-
Crow's foot flare wrench for the win
Vintage Mustang ForumGetting the brake lines sorted on the 65 meant getting the rear most line on the bottom of the distribution block loose. The regular flare wrench was unable to assist as there's not enough room for the tool there. So I bought the crow's foot flare wrench set from Northern. Verified rotation...- 2
- 130
-
ylexot · updated
-
Still on my fastback louvre vents
Vintage Mustang ForumI found out why that one plastic plate got cracked. SOMEBODY installed it with those spring clips over the lips of the channels that the thing slides in . They are supposed to be inside the channels. My driver side was wrong but the passenger side(which I later checked) was installed...- 4
- 140
-
How to avoid a money pit... (disregard title)
Vintage Mustang ForumOk I’m going to try and make this very loaded question alittle less loaded. Right now I’m a college student on a hard budget. Makes things difficult. I’ve heard so many say they wish they dropped the cash on this or that instead of cheaping out. I want to know where I can cheap out and where I...- 146
- 3K
-
Jr_Palm · updated
Join now to ask and comment!