Vintage Mustang Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
534 Posts
Discussion Starter · #1 ·
Replaced the brake handle on a '65.

Used the Dremel to cut a 'channel' in the handle to remove the pin. The pin was easy to pull out after that.

So, for future posterity, here is an image of that.

Auto part Household hardware Metal Electric blue Nickel
 

·
Registered
Joined
·
42,892 Posts
Replaced the brake handle on a '65.

Used the Dremel to cut a 'channel' in the handle to remove the pin. The pin was easy to pull out after that.

So, for future posterity, here is an image of that.

View attachment 855241
Easiest way to remove the handle is to push the pin IN... it'll fall into the middle of the tube and out the bottom, onto the floor.
 
1 - 4 of 4 Posts
Top