Vintage Mustang Forums banner

Edelbrock/Holley throttle linkage connection pic.

472 0
Since there has been a few posts on linkage hook ups, I thought I'd post a picture of my set up.

I used a spherical end I bought from Grainer. It was cheap, works very well and most important, securely fastened to the carb! You'll need to cut the end off your present linkage and thread it. IIRC, I used a 10-24 die.
http://a1.cpimg.com/image/A9/DC/12037801-d91b-02000152-.jpg
Top