Vintage Mustang Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
1,538 Posts
Discussion Starter #1
Let me see your EFI install in your classic mustangs!!! This is for motivation for my next project.... :chainsaw:
 

·
Registered
Joined
·
675 Posts
Here's one of the install I did on my 68 a couple years ago. It's a basic no frills install using a stock '93 motor and trans. It's been running strong ever since...

68Restoman

http://memimage.cardomain.net/member_images/3/web/519000-519999/519500_18_full.jpg
 

·
Registered
Joined
·
5,583 Posts
I can never post pictures :no: but if you click on my truck than on thumnails I have a couple of engine shots.

Mark
 

·
Premium Member
Joined
·
11,701 Posts
*My old setup*
http://www.kkpony.com/thumbs/eng-w-ac.jpg
(click for larger picture).

I don't have pics of the Accel setup installed and it's not installed at the moment, so I can't take any. I'll get some when I get it put back together later this week (hopefully).
 

·
Registered
Joined
·
7,295 Posts
*My old setup*
http://www.kkpony.com/thumbs/eng-w-ac.jpg
(click for larger picture).

I don't have pics of the Accel setup installed and it's not installed at the moment, so I can't take any. I'll get some when I get it put back together later this week (hopefully).
Looks fuggin sweet. Did you fab the export brace and M.C. bar yourself - or is that something bought ?
 

·
White Elephant Guy
Joined
·
12,969 Posts
*My old setup*
http://www.kkpony.com/thumbs/eng-w-ac.jpg
(click for larger picture).

I don't have pics of the Accel setup installed and it's not installed at the moment, so I can't take any. I'll get some when I get it put back together later this week (hopefully).
Looks fuggin sweet. Did you fab the export brace and M.C. bar yourself - or is that something bought ?
Looks like TCP stuff to me
 

·
Registered
Joined
·
768 Posts
67 Mustang Fastback
302 EFI AOD Vortech 5psi Supercharger
4 Wheel Disc Brakes
1989 Factory Cruise Control
Rack and Pinion Steering Lots more.
http://www.mustangfactory.net/customercars/Bill Mehterian 67 Fastback/motorsport valvecover 004.jpg
 

·
Registered
Joined
·
1,552 Posts
Someday soon I hope mine looks as sweet as the ones showing here...
Engine wise, I still have to work out my air intake setup, some of the electrical and plumbing odds and ends... I'm pushing the intitial fire up until late winter since I've taken on some additional metal working projects.

http://home.comcast.net/~stangg/
 

·
Premium Member
Joined
·
11,701 Posts
I hope to have my Accel setup back in place in the next week or so. I have the fuel rails still on the manifold, so could shoot you some pics of that if you want. We used hard lines for front and rear with a pressure guage in-line on the front and the regulator on the back.

The only problem with the 4v throttle body is that the linkage sticks up and hits just about any air cleaner base except the Hi-Po unit. I did manage to get a 3" element under the stock hood though, which will work for me. I am going to try modifying the oval Cobra cleaner base in hopes that it will fit too.
 

·
Registered
Joined
·
1,538 Posts
Discussion Starter #11
KKETELL,

Are you using the complete accel setup including computer??? I just got my accel intake and fuel rails...
 
1 - 12 of 12 Posts
Top