Electric Choke Wiring
1 - 3 of 3 Posts
Joined
·
2,446 Posts
These don't draw much amperage. 16 - 18 ga. should be fine.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Help needed on DIY Rack and Pinion conversion
Vintage Mustang ForumHi everyone, Newbie here. I need to do a DIY rack and pinion conversion on 69 Mustang. Ive been searching through the site for the last couple of days but seems I cant grab anything solid. I actually need to do a RHD conversion (please dont ask why, and dont tell me how good is LHD because the...- 14
- 399
-
Need User Images for New Banner
Vintage Mustang ForumPost away if you want to be in the new site banner. Prefer high resolution images with no open doors, windows, hoods. High and low angels with no obstructions or shadows. Post them up here and we will try to work them into the upgrade. Jeff- 118
- 1M
-
Administrator · updated
-
hanging door solo
Vintage Mustang ForumAnybody have any pointers or tips on how to hang this door by myself. Once i get it on there i feel pretty confident i will be able to wiggle it around and align it. I just don't see how i am going to hold this thing up and start a couple bolts without dropping the door and ruining my day.- 0
- 0
-
do it all angle grinder
Vintage Mustang Forumlooking to get a angle grinder. cordless ones are out of the question, they are stupid expensive. i know it needs to be 4.5 inch one but how many amps should i get? i went to lowes and held 7,9, and 11 amp dewalt ones and i swear they are all the same size and weight. 13 amp one was def much...- 22
- 700
-
organ donee acquired - 69 mach1
Vintage Mustang ForumI'm getting $21k and get to retain the coupe as a salvage - with probably 90% of the parts still useable. It was really tough to find what the price entry point I wanted to go into with my next project. decided to go with a "local" option (5 hour drive) for $7,500. it needs the usual floor...- 24
- 622
-
schweigert · updated
Join now to ask and comment!