Vintage Mustang Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10,775 Posts
Discussion Starter #1
Had all intention to remove both but as soon as I measured how high this boom could lift the engine with the car on the ground let alone when the car is jacked up, no way. So instead I first removed the engine, stripped it and took it to our warehouse for storage. Came back home and lifted the car way up and using a tranny dolly pulled the tranny out through the front. Pretty easy.

Here's some shots. To advance to the next shot, click on the upper right pointing arrow:

http://community.webshots.com/photo/173988122/175111547fqXvNR

Thanks to everyone's input. It was a lot easier than I ever thought.......

Time for a glass of wine.....
 
1 - 1 of 1 Posts
Top