Vintage Mustang Forums banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
630 Posts
Discussion Starter #1
I bought the full front and rear kit for my 68 Mustang 3 years ago. 2 years ago I had a shop down in Tennessee install the rear kit and do the mini-tubs at the same time. They did a decent job but was not completely happy with how they did the bracket attached to the rear-end for the panhard rod. I am now ready to install the front kit and am considering using someone else. How can I find a shop that has experience installing these kits...relatively close to where I live? It was an 8 hour drive each way for me to bring the car to Tennessee. Would love to find someone closer.
 

·
Vendor
Joined
·
461 Posts
I bought the full front and rear kit for my 68 Mustang 3 years ago. 2 years ago I had a shop down in Tennessee install the rear kit and do the mini-tubs at the same time. They did a decent job but was not completely happy with how they did the bracket attached to the rear-end for the panhard rod. I am now ready to install the front kit and am considering using someone else. How can I find a shop that has experience installing these kits...relatively close to where I live? It was an 8 hour drive each way for me to bring the car to Tennessee. Would love to find someone closer.
I have two of my sales guys investigating some possibilities. What is your zip code?


-J
 

·
Vendor
Joined
·
461 Posts

·
Registered
Joined
·
1,600 Posts
Ok, I don't have anybody right in your backyard but I do have one a couple hours away that is very well qualified. In fact they have a '67 in their shop right now that they just installed one of our front ends on. It's a pretty wild piece too, you can check it out here. https://www.facebook.com/Total.Cost.Involved?ref=tn_tnmn#!/media/set/?set=a.402653279794306.93400.237225283003774&type=1

Perry @ Hat Creek Customs
704-639-1628


-J
Yep, looks like they could handle it.
 
1 - 7 of 7 Posts
Top