Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part MAY's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
739 Posts
Discussion Starter · #1 ·
I have painted all areas before seam sealing. Should I repaint areas that i seal? Prime first or just shoot some more paint on them?
 

·
Registered
Joined
·
1,669 Posts
The factory did the seam sealing first, followed by painting the body.
 
G

·
EPOXY PRIME FIRST. Seal the metal as best as you can. Look at the problems in the mustangs where rust starts. Usually under the seam sealer since there was no paint. Over time, it can lift and let moisture in. Epoxy prime, seam seal, prime again with regular primer, then paint.
 
1 - 4 of 4 Posts
Top