Vintage Mustang Forums banner
1 - 2 of 7 Posts

· Super Moderator
8,673 Posts
They come ugly bakelite grey.

I wet sanded the ps pump, cleaned it with paint prep, and painted it with a rattle can. I used Plasticoat hi-temp "universal" black. They have a flatter black which would be closer to stock. The PS pump is just NASTY. It's about impossible to get all of the fluid out of it. I put mine upside down in the utility sink and let it sit for a full day and it still had fluid in it.

I took all the brackets all the way to bare metal with wire brushes on a drill and primed and painted them.

Full project details at my More Power page, if you're interested.

Good luck. If you have any questions, drop me a line.


'65 Convertible (with many mods.)
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.