Vintage Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
So this might be a dumb question but does anyone know how to remove the studs from the old drum to replace into new drum brake?


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
2,788 Posts
1.) Remove drum from car
2.) Place lug nut on stud
3.) To provide back support for the drum place a large, deep well socket on the inside of the drum such that the head of the stud fits down in the socket
4.) Rest socket and drum on a firm surface
5.) Whack lug nut with a hammer driving the head of the stud out of the drum and down into the socket.
6.) Rinse and Repeat...
 

·
Registered
Joined
·
327 Posts
1.) Remove drum from car
2.) Place lug nut on stud
3.) To provide back support for the drum place a large, deep well socket on the inside of the drum such that the head of the stud fits down in the socket
4.) Rest socket and drum on a firm surface
5.) Whack lug nut with a hammer driving the head of the stud out of the drum and down into the socket.
6.) Rinse and Repeat...
Ya forgot to Lather...rinse and repeat.
As needed😁
 
1 - 6 of 6 Posts
Top