i was feeling a bit uptight today.the weather is overcast and my job screwed around with the pay .had to go in on my day off to get it and rush the bank.thought about the order i placed with npd early yesterday all my replacement panels and they said it would be in about wednesday.well as i was mopeing around viewing vmf the wife says you got a bunch of boxes from ups you orderd something else again.well its good friday and npd deliverd everything overnight man i needed that lift today.
good friday
Join the discussion
Recommended Reading
-
Strang terrible noise in my new to me 65
Vintage Mustang ForumMy new to me 65 6 cylinder convertible has a terrible noise. A loud rattling like something is coming apart or falling off the car at higher rpm's. I did notice a hole on the RH side of the bellhousing (automatic C-4), did not think too much about it. Well I got it home, popped the hood in...- 5
- 174
-
A/C solenoid
Vintage Mustang ForumGor a Holley A/C "kick-up" solenoid and need some help with the wiring. I can't find where i am supposed to tap into or how I'm supposed to wire this thing anywhere. Has anyone installed one before and how did you wire it?- 6
- 109
-
FireHorse68 · updated
-
best shock option for occasional driven 1967 mustang convertible
Vintage Mustang Forumlooking to replace my 13 year old shocks with something that would look like originals and give me the best ride. any suggestions appreciated. gas or oil filled and manufacturer.- 18
- 333
-
Rear end assembly - where to start?
Vintage Mustang ForumI purchased a 3.55 diff, some brake parts and the carrier for a 4 bolt to 5 bolt conversion. I’ve never done a rear end. Where should I start? I assume I need to start with the diff. this forum was invaluable to helping me rebuild my T5, let’s do the rear! What should I check? What is a...- 4
- 183
-
Parking Brake Delete 66
Vintage Mustang ForumI did a 4r70w swap in my 66 coupe. One of the issues that I'm having is the parking brake is in the way/doesn't fit correctly/rubbing. Since I moved the trans mount to the rear for the 4r70w, the current configuration doesn't work. I've added a pipe nipple to the adjuster but it's just not...- 14
- 103
-
cturboaddict · updated
Join now to ask and comment!