Good Guys Car Show
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Always heard it was possible to split a block, finally saw it in person.
Vintage Mustang ForumWent for a walk last night and ran across my neighbor pushing his '65 Mustang back home. Ran over and helped him push it the 4 or so blocks back home. He said he was getting on it, going through the gears and the engine blew out a bunch of white smoke and it just stopped running. He tried to...- 7
- 302
-
wilit · updated
-
67 with 351w - passenger side radiator inlet and outlet, what hoses?
Vintage Mustang ForumI'm trying to figure out if I need to order hoses for a 69 351 with a 24" radiator so I will get the correct hoses or if there is a different route I should go. Most all hoses I look up don't tell you what side they route to. Does anyone know which hoses I should get? The Autolite concours...- 1
- 0
-
mikec35 · updated
-
Shock Tower Spring Covers
Vintage Mustang ForumThe covers are held on by bolts that go through the fender aprons. Do the bolts have j-nuts or flange nuts? My 67 had a mix of both.- 1
- 44
-
bmcgc · updated
-
Will the Hayden 2947 Clutch Work With a 6-Bladed Fan?
Vintage Mustang Forum1970 Mach 1 with 351 Cleveland My fan sits too far into the shroud. It doesn't pull enough air at idle and the engine gets progressively hotter if the car is not moving. I want to install a shorter/low-profile fan clutch to move the fan back a bit. It looks like the Hayden 2947 is the...- 1
- 80
-
Brake light issues (...again...): 67 coupe
Vintage Mustang ForumThe culprit is the driver side brake light. Turn signals all work, and parking lights work. But the driver's side brake light doesn't work when the pedal is depressed or flashers are engaged. I've chased this problem before in the past, I put in new flashers for the turn and emergency signals...- 9
- 162
Join now to ask and comment!