G
Guest
·Guest
Joined
·
0 Posts
Our club show in Saint Pete was a record setter. 206 cars, most in 14 years. I will upload pics to my webiste so stay tuned.
GREAT show today...
Join the discussion
Recommended Reading
-
I cut my losses and found a local shop to do my brakes after wayyyyyyyy to much failure.
Vintage Mustang ForumI found out the last few days its really tuff to find a shop that will agree to work on a classic. When I was working on my brakes changing to new lines and wheel cylinders I decided to upgrade to the dual master cylinder and My troubles started. My master cylinder that I was sent did not work...- 10
- 264
-
Perplexed with engine/ignition issues
Vintage Mustang Forum65 D code 289 has new radiator, electric ignition and coil (pertronix) and new rotor and distributor cap, spark plugs and wires, and a remanufactured Autolite 4100. It cranks up on the first key turn cold without any gas needing to be pumped into carb. The engine needs rebuilding eventually as...- 0
- 0
-
jtjones_10 · updated
-
1966 Mustang 289 - perplexing starting issue after car gets hot
Vintage Mustang ForumLooking for some help, thanks in advance. I am encountering a very interesting issue. I have a new battery, voltage regulator, solenoid, battery terminal ends; and the problem persists. Car will start and run fine and I take it out and get it to operating temps. Then when I get home and turn...- 9
- 148
-
Suggestion for AFR meter or gauge
Vintage Mustang ForumI am going to purchase an afr gauge to get the tuning right for my car. I am.looking at his one but wondering if anyone has any experience with it. I do not want to permanently hook up or into electrical system. I called summit and they said i can just run a cable to 12 Volt like battery...- 3
- 113
-
U-Joint
Vintage Mustang ForumI have installed a 9" rear end from 1959 Ford Fairlane, into my 66 Mustang. Does anyone know what U-Joint I need to mate with my 66 driveshaft?- 2
- 69
Join now to ask and comment!