G
Guest
·Guest
Joined
·
0 Posts
I'm replacing the head gaskets and I was wondering if any one knew the torque specs for the head bolts on a 289?
Head torque specs
Join the discussion
Recommended Reading
-
Fitting Convertible inner rockers on a coupe....
Vintage Mustang ForumSo, when I last left this project (years ago) I was in the process of fitting convertible inner rockers into my 65 coupe. The reason for this was to stiffen up the chassis for some spirited driving / Autocross / some HPDE events. At least that was the plan. The inner rocker was purchased from...- 3
- 98
-
rusty105 · updated
-
Rear gearing question
Vintage Mustang ForumSo I realize this is probably a topic thats been exhausted ,but I would like to ask opinion on what I am trying to accomplish. I have my 1971 mach1 thats an H code 351c 2v from factory with 3 spd top loader and 2:75 conventional rear. It is an adventure starting out in first playing the motor to...- 53
- 1K
-
Low vacuum when hot?
Vintage Mustang ForumI seem to be having a vacuum issue. The car runs great during the first 30-45 mins then the steering starts to feel heavy and the brake pedal is hard to push down. Engine still feels strong and transmission shifts as it should. Power brakes and Borgensen power steering with ford PS pump. What...- 5
- 92
-
Mel_llama · updated
-
Original 66 AM radio wiring to updated car wiring?
Vintage Mustang ForumI have a original wiring 66 am radio but my car wiring has been updated, how do I hook it up??- 1
- 55
-
Stock 5.0 HO cam timing advance 4 degrees on carbed engine?
Vintage Mustang ForumHi all, I currently have my engine apart because of some head work(leaky exhaust valve). As this is being fixed I am wondering if I should advance the cam by 4 degrees or not. The reason why is that my vacuum is a bit low (15 to 16 HG)which causes the brake booster to assist less driving slow...- 0
- 30
-
richard66coupe · updated
Join now to ask and comment!