Vintage Mustang Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
I bought a piece of that heat shield with aluminum foil on one side and the recycled looking fibers on the other side. I put the aluminum side down on the floor. The problem is-the tape won't stick well to the fiber side. Today on Trucks, they put the fiber side down and the aluminum side up and glued it and taped the aluminum side. Any ideas?
 

·
Registered
Joined
·
282 Posts
Aluminum side down. This reflects the heat from the road and engine/trani. Soft side up. This acts as a sound deadener (if that's a word). If you put that stuff above the headliner, aluminum side toward the sun, soft side toward you. Works well.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top