Vintage Mustang Forums banner

1 - 3 of 3 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
How are the heater hoses routed on a 351W? There are two nipples out of the water pump and one out of the thermostat housing and a plugged hole in the intake manifold. Thanks
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
In my car, (70 Mach 1, 351-W,AC,water pump inlet on the passenger side).

The top nipple on the water pump goes to the nipple on the thermostat housing attached to the manifold(small 90 degree rubber hose).

The bottom nipple on the water pump goes to the left heater core nipple.

The fitting in the intake manifold goes to the right heater core nipple.

Hope that helps.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
Yes, that helps a bunch. Thank you very much, Greg
 
1 - 3 of 3 Posts
Top