Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 8 of 8 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter · #1 ·
Aloha everyone. A buddy just bought a '68 convertible and I'm trying to figure out what intake manifold is on there. I believe the engine is a 289. The intake manifold looks like it's aluminum, but I don't see any branding cast into it. Strange, as usually the manufacturers plaster their logo quite prominently. Anyway, here's some pics. Hopefully someone can identify this.

637997121.jpg
PXL_20210405_021732746.jpg




789635


Mahalo!

Harry Z
 

·
Registered
Joined
·
1,724 Posts
That's the one , right from China!
 

·
Registered
Joined
·
201 Posts
Professional Products
Yep thats what I thought . I tried one of the air gap copies on my windsor stroker with the ford aluminum heads and I could see the intake port miss match from Wyoming and I live in Texas. If its in your buddies budget I would swap it out for a Weiand or at least take the carb off and if you can see well enough to look at any of the ports. Mine was obvious and I sent pics back to the distributor. They paid for return ship and I got a Air Gap.
 

·
Premium Member
Joined
·
6,152 Posts
1 - 8 of 8 Posts
Top