Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part MAY's Ride of the Month Challenge!

1 - 1 of 1 Posts

5,578 Posts
Discussion Starter · #1 ·
Trying to put this thing together.

It looks to me that the "winged" wheel insert is screwed to the inner horn ring plate using those screws with the springs on them, through those little post things. You press on one side or the other, and it makes contact with the outer horn ring plate.

But, when I screw in the outer horn ring, it presses the outer ring so tight against the inner ring that there's no way that can work. I must be doing something wrong, or I have a wrong part somewhere. Is my horn ring right? It's marked C7AA-13800-C. Obviously not a 1966 part, and the "C7AA" is awful strange for a Mustang part. According to my references, it SHOULD be part 13805 anyway, not 13800.

Can provide pictures if there's not enough information here.

1 - 1 of 1 Posts