Vintage Mustang Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2,545 Posts
Discussion Starter #1
I will create a webpage for this when I get the time. Any additional links/suggestions is appreciated. Thanks.

PS: I've never repaired a cowl, so I can't answer any questions.

---------------------------
Q – How difficult is it to repair a cowl? Should I repair it myself?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1256414

Q – Cowl patch panels are designed for 65-66 Mustangs, how do I make them fit my 67-68 Mustang?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1321798

Q – There are no cowl patch panels for my 69-70 Mustang, what do I do?
A- http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1317884

Q – How about 71-73 Mustangs?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=960778

Q - How do I remove the brazing on the ends of the cowl?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1327055

Q – Can/Should I use rubberized undercoating to seal up pin holes in my cowl?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1311827

Q – Only my cowl hats need replaced, should I remove the entire cowl cover?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1216758

Q – Should I use those plastic cowl hats to fix my pin-holed cowl hats?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1329823

Q – What should I use to remove the spot welds on my cowl?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1153240

Q – I drilled all the way through the top and bottom panels, how do I fill in the resulting hole?
A - http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=967654

Q – Where can I see write-ups/pictures of the repairs others have done?
A – jpony645: http://forums.vintage-mustang.com/forums/showflat.php?Cat=0&Board=forum&Number=1098398
TonyC: http://www.cardomain.com/ride/583449/2
68CVert: http://mywebpages.comcast.net/gturner51/Cowl_Vent.htm
66bluecoupe: http://www.66bluecoupe.com/cowl/
? : http://eolson1111.tripod.com/mustang2/index.html
Erik_H: http://www.cardomain.com/ride/721934/2
Woosiecoupe: http://www.geocities.com/troop851cali/First_Page.html
RichLong: http://rich.longbros.com/
bullit: http://www.geocities.com/MotorCity/Downs/8586/cowl.html
Mr_Siv: http://ksmid5.home.comcast.net/mustang/cowl.html
Doug67: http://personal.ecu.edu/boydd/tech/cowl/cowl.html
?: http://really-rusty.tripod.com/body_repair_page___7.html
Frank65: http://mysite.verizon.net/vze22kvh/Frankies_65/frankies_65_012.htm
tmendham: http://www.mustangbarn.com/cowl_Vent_repair.htm
 

·
Registered
Joined
·
677 Posts
Nice work! That looks like you covered all the bases.

I did notice that the new 67-68 full cowl panel has been released. That will probably make the list just a little longer, when some one on here posts how it fits.

(Only a year too late for me. I did mine last summer!) :(
 

·
Registered
Joined
·
446 Posts
Mustang Monthly has a great cowl repair on their site.
 

·
Registered
Joined
·
2,545 Posts
Discussion Starter #7
Thanks guys! There is a link at the bottom of my sig pointing to the web page.
 
1 - 7 of 7 Posts
Top