Joined
·
4,928 Posts
Maybe this has been discussed and I missed it.... What happened on the "Mustang of the week" .... guys quit submitting ? Haven't seen an update in a while...
Hey Bob!
1 - 2 of 2 Posts
Joined
·
1,481 Posts
Yea-- Just when I get my mustang done enough to be considered a mustang.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Flexplate hitting starter
Vintage Mustang ForumSo, i installed my engine with a new flexplate ( 289/302 with a c4) I have a problem with the flexplate balance weight hitting the starter somehow? What can i have done wrong? Is it possible to have installede the flexplate and torque converter together wrong? All of the torque converter studs...- 4
- 93
-
Coil spring compressor... I've lost my nerve!
Vintage Mustang ForumHi All, So, I removed the front suspension springs using the 'usual' internal coil spring compressor. No problems but always a bit nervous. I've now added new upper & lower control arms and am ready to reinstall the coils. I spent ages trying to get it just right before tightening but backed...- 41
- 2K
-
fitting monte carlo bar ?
Vintage Mustang Forumafter a total rebuild of my 66 fastback i am a bit disappointed by the car handling at 60+ mph i still have a few things to do that should improve the car's stability.... i already have an exportbrace installed but still have to install a monte carlo bar... and just as with the exportbrace it...- 28
- 4K
-
mustang-art · updated
-
Group buy on PCV valves
Vintage Mustang ForumNo it’s not a joke, if we can buy 6 or more we get 25% off. I have one on my daily driver and it fantastic and they have a 30 day warrantee don’t like it send it back.. Anyone interested I’m willing to do the leg work if I can get solid commitment.. http://mewagner.com/- 38
- 833
-
66Ccode · updated
-
Tips, Tricks and Hacks
Vintage Mustang ForumMany of us have discovered little things over the years that could help others, post em up! Here are a couple: 1.) When removing a starter from a 65-66 with 289/302 and long tube headers, it comes out and goes in much easier if you un-bolt the idler arm from the frame so that the steering...- 57
- 4K
-
66coupe289 · updated
Join now to ask and comment!