G
Guest
·Guest
Joined
·
0 Posts
How much of the white stuff did you get hit with??
Hey Teebone!!
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Seats
Vintage Mustang ForumHi, my '66 coupe came with front aftermarket seats and i am looking for something more period correct. I found some clean '67 fastback seats locally and i am wondering if they would fit in my '66? Also, is there any differences between fastback and coupe seats? Thanks a lot!- 4
- 0
-
drzmat · updated
-
Driveshaft Length?
Vintage Mustang ForumHey guys! So I have a 67 mustang and in it I have a 68 302, a c4, and an 8 inch rear end. I’ve tried to look for a driveshaft for a 68 302 and c4 but all I get are driveshafts first a T5 conversion. Does anyone know what length or better yet, what driveshaft I can through in the 67? Thanks!- 3
- 100
-
Got my T5!
Vintage Mustang ForumWell after lots of searching, want adds, bartering, "horse trading" I finally have a T5 to put in my car. I'm into it for $150 CAD ($110 USD) From all the research I did this will work fine for my "stockish" Sunday driver car. 1968 mustang 289, 3 speed. I will use my existing clutch and...- 44
- 723
-
Stangfire · updated
-
67-68 A/C Vacuum Lines Through Firewall - Seal?
Vintage Mustang ForumIs there a seal or grommet around the two vacuum hoses through the firewall for the A/C valve and vacuum reservoir (see my index and middle finger)?- 3
- 90
-
69 Mach one 351 W
Vintage Mustang ForumHello all, Question of the day! I have a 69 mach one with the original 351 W 2 barrel Im planning on having the engine rebuilt this coming winter with some performance upgrades and Im curious if I end up needing to go with a 4 barrel carb. Which I already have a factory intake for, will I need...- 2
- 57
-
marshall · updated
Join now to ask and comment!