[Taylor]

Any advice before I take on this prodject?

1" front
3/4" rear

 

[latamud]

Depending on the type of rear sway bar you have, you might have to drill some. Other than that it is a bolt up project.

 

[68restomod]

From some posts I've read and magazines too, it makes a big difference in corners.

 

[Guest]

Just wondering why you did not decide to go with a 1 & 1/8" front bar?

 

[Arto65FB]

They are quite fat, some people have had installation problems with 1 1/8" front bar. Also, some vendors (M+, IIRC) say that 1 1/8" bars are manufactured from lesser steel and are no better than 1" bars.

 

[Arto65FB]

The suspension should be loaded when you tighten the bolts. I would recommend adjustable bar, at least for rear.