Vintage Mustang Forums banner

Installing ProMotorsports Coils - Results

509 views 3 replies 2 participants last post by  geegee 
#1 ·
Installed the ProMotorsports (Eibach) variable rate springs in my '65 fb last evening. Haven't driven it yet but there is a lot of height difference between these and 620's that were there before. In my opinion, you wouldn't want to go much lower than these provide...I have the 380-420 rate versions for '65/'66GT. No need to cut these!
 
#3 ·
geegee,

So what is the difference in ride hight from stock and the 620's to the ProMotorsports coils? Also were your 620s 1 inch lower than stock?
 
#4 ·
The ProMotorsports coils are about 2" lower than the 620's I had before. My 620's were uncut. In my opinion, the ProMotorsports coils are perfect with my Eaton four leaf standard eyes on the rear. I use 205/65R15's all around on 15x7 rallye wheels (all are deep backspacing).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top