Instrument Cluster Light Sockets | Vintage Mustang Forums

1 - 1 of 1 Posts

G

Guest

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Mar 20, 2001

I'm in the process of moving the cluster guages from an '87 LX into my '68 Fastback cluster. I need a source for the two conductor, insulated light sockets which fasten into the '68 cluster. I have lots of single wire sockets which gain their ground through the cluster frame. I need to be able to isolate the bulb from the cluster frame. Anyone jnow of a source?

Thanks a million in advance.

1 - 1 of 1 Posts

Recommended Reading

enggine shuts off after reaching operating temp

Vintage Mustang Forum

Need help with my 65 mustang fsbk it has a 302 8000 miles on engine new demon carb / fuel pump, pentroneix distributor and coil car starts and run well but after it runs for a few minutes it just shuts off as if I turned the ignition off will attempt to start but wont until it fully cools...
- 2
- 81
- E
  Eppi · updated a moment ago
Engine Bay Paint

Vintage Mustang Forum

I bought a couple cans of semi-gloss black for the engine bay. Semi-gloss black is getting hard to find. Now Im second guessing myself and thinking that the semi-gloss has to much gloss. I painted the dash with Krylon Satin Black and it turned out really nice. So now Im thinking the Satin...
- 12
- 303
- bmcgc · updated 1 h ago
Fender damage in shipping car - easy fix?

Vintage Mustang Forum

Hi all, I finally received my baby today off the back of a flatbed. Shipped from SoCal to my new home across the sea. Turns out they put a major dent in my fender and I'm pissed and very sad. I just had it fully painted before shipping it! Anywho, I'm handy and did some mechanical work...
- 25
- 882
- DoctorC · updated 2 h ago
Distributor for 302

Vintage Mustang Forum

Looking for a distributor for my 1969 302. Any recommendations? Thoughts on Cardone, PerTronix, and HEI would also be appreciated. Thanks!
- 9
- 153
- Stang_Betty23 · updated 4 h ago
Under Radiator Shroud or Panel

Vintage Mustang Forum

Anybody running a shroud or panel under the radiator like modern cars? I recently took out a perfectly good radiator at an autocross due to a rock getting between the radiator and engine and bouncing into the radiator and taking out 4 rows when it bounced off the fan. Maybe it was a 1 in a...
- 4
- 159
- Nailbender · updated 4 h ago