Vintage Mustang Forums banner

Instrument Panel Light Tubes

680 Views 5 Replies 5 Participants Last post by  ravenblack67
Anyone know where I can get the cardboard tubes with the rubber seats that are part of the instrument panel?
1 - 6 of 6 Posts

· Registered
Joined
·
4,390 Posts
The cluster in my 66 did not have the tubes for the turn signals. When the signals were turned on the flash lit up the entire cluster.

I had some rigid plastic tubing, paintd it black so light would not bleed thru, then cut it to the proper length. It works great.
 

· Registered
Joined
·
348 Posts
Ed,

I don't know for sure but you could probably use the tube from model rocket engines... They are about the same size and are mode from cardboard...

If you are interested in that, PM me today and I will compare my tubes (instru. cluster currently dissambled) to some of my rocket engines (from my younger days).

Good Luck
Keith
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top