Vintage Mustang Forums banner

INTAKE HELP

1K views 6 replies 2 participants last post by  Guest 
G
#1 ·
i have a 351c cast intake sitting in the garage(didnt know i had it until cleaning yesterday)
part # D3ZE-8425-AA does anyone know what this is for?and what it is worth?

THANKS,
SEAN
 
#2 ·
It's for a 73 'stang w/ a Cleveland, is a 2 or 4 barrel intake? I know they tend not to go for very much, you might be able to get a few bucks off of it in Ebay.

-Jason

'72 Mach 1 || '90 Talon TSi AWD
http://nosaj122081.tripod.com/parade3.jpg
"Thats not a leak, my car's marking its territory!"
"If you've done it, it ain't braggin'." -Roy Rogers
 
#4 ·
I just check Ebay, stock 4bbl intakes seem to be going anywhere from 10 bucks up to 30... Not tons, but hey, couple tanks of gas!

-Jason

'72 Mach 1 || '90 Talon TSi AWD
http://nosaj122081.tripod.com/parade3.jpg
"Thats not a leak, my car's marking its territory!"
"If you've done it, it ain't braggin'." -Roy Rogers
 
#6 ·
Sean,

You're running a 600hp C engine and don't know what the stock manifold is worth? wow....

If you really want to know, put it on eBay with a reserve of 200.00 and see where the bidding goes...that's a pretty late 4V manifold...

The main folks interested would likely be restorers but on the right day, you never know...

Take a look here for a recently closed auction on a similar, albeit earlier piece...

Pat
http://www.jps.net/binay/webdocs/strtmstng002_sml.JPG
 
G
#7 ·
thanks for the advise Pat

i really dont know the value of stock parts because i have been dealing with performance parts only...

just found the manifold and dont remember how or where i got it

THANKS,
SEAN
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top