interior video
Join the discussion
Recommended Reading
-
Undercarriage/Transmission Tunnel Vibration ??
Vintage Mustang ForumHey guys, I'm sorry if this has been discussed before but I just recently started experiencing a vibration in my 68 convertible. It's a T5 manual 289 car and while driving I'm getting an annoying vibration that seems to be coming from underneath my drivers seat and transmission tunnel Any...- 8
- 209
-
Improve traction
Vintage Mustang ForumSo what options do i have for improving the traction at the rear wheels? The car is a 65 mustang with a open 8" rear end. I know this sets som limits to how good the traction can be, but it really has no traction at all. If the ground is just a little wet, the car will just spin the tires with...- 3
- 23
-
Street or Track Lower ball joint covers split
Vintage Mustang ForumHey everyone! I know there are a lot of us that run Shawns awesome products. Both of my boots are split on both sides with about 1500 miles on them. Anyone else run into this issue? Too, what’s the easiest way to replace the boots without tearing the whole front end apart again? Thanks!! Chris- 12
- 168
-
Badbenz94 · updated
-
Door scuff plate stainless screw corrosion
Vintage Mustang ForumI pulled my factory original aluminum door scuff plates off and found some significant corrosion around each of the screw holes. I find it interesting that Ford used stainless fasteners for an aluminum plate when stainless is known to corrode aluminum. Maybe that wasn't well known back then...- 11
- 203
-
Safe place to buy Champion radiator?
Vintage Mustang ForumI’ve been making a lot of changes to my cooling system recently, and I’ve noticed that lots of people have been recommending the champion radiators. I have someone who would buy my relatively new 20” for almost purchasing price, and so I am interested in picking up a 24” champion since the...- 7
- 124
-
AustinE · updated
Join now to ask and comment!