Vintage Mustang Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
948 Posts
Discussion Starter #1
There is an ad locally for some Mustang parts and among the list was this distributor. Is this a good price?

Also, he has a pair of the inside vents for a 65/6 fastback, what are those going for these days?

Thanks!
 

·
Registered
Joined
·
663 Posts
yes 75 is a good deal just make sure it is C5OF-12127-e the e is the most important part. Not sure about the inside vents
 

·
Registered
Joined
·
10,287 Posts
Yes, if it is in good useable condition that is a great price.

They normally go for $150 and up
 

·
Registered
Joined
·
21,010 Posts
Beware that there were "service replacement" dual points that were vacuum advance models without the canister and a block off plate. Not the same!
 

·
Registered
Joined
·
228 Posts
Buy it and post the thing on Ebay...
 

·
Premium Member
Joined
·
7,054 Posts
Several things to check:

What is the manufacturer?

May be a C5 PN, but it needs to be FOMOCO to be original, if autolite, then sold over the counter 1967 - 1970, and Motocraft: 1970 - up.

Bought a dual point one time, didn't check it real close, turned out to be a single point, with a dual point aftermarket kit, and the housing for the vaccuum advance neatly ground off and filled with bondo and painted silver.
 

·
Registered
Joined
·
60 Posts
If it is a 67 Autolite, It may be original for a late 67 hipo car. I have one on my 67 GT-350 and it is correct, not over the counter.
 
1 - 7 of 7 Posts
Top