Vintage Mustang Forums banner

1 - 3 of 3 Posts

·
Banned
Joined
·
4,577 Posts
Discussion Starter #1
On a 67 main harness that has the GT fog light switch wiring, can that portion be taken off of the harness and wired into another non-GT harness?

Thanks
Doug
 

·
Registered
Joined
·
406 Posts
Yes. The fog light wiring is not integral to the main harness wiring (does not run through any integrated connectors). Under the dash, this wiring is taped to the outside of the main harness (not wrapped as part of the harness, just little tape bands every few inches). Under the hood, the wiring is wrapped as part of the harness (not taped to the outside) and the feed goes through the firewall plug. It is fairly easy to find the wires and pull them through the plug. You will have to unwrap the "GT" harness to get this wiring out.

Regards,
 
1 - 3 of 3 Posts
Top