Or to anyone using a IDIDIT tilt column. Whats involved with the installation in the body? Like what length to go with , connectors both mechanical and electrical, dish off set, and size of steering wheel to use. This would be for a 68 Fastback, auto, and a 6' driver. Kketell, I lost your pics you sent me of your tilt, please resend them if you still have them. Thanks... ::
KKETELL...need info on tilt column...IDIDIT users 2
1 - 2 of 2 Posts
Joined
·
11,703 Posts
Ididit makes a "kit" for the vintage pony. They can tell you exactly what you need.
As for the length in general, a lot of it depends on whether or not you moved your seat pans back. If they are in the stock position then you most likely will want the stock length column.
The wiring on the column is GM, so you will want to adapt from the Ford connectors to the GM connectors, which are provided by Ididit. That way, should you decide to go back to a stock column you can do so with minimal fuss.
Pictures here
As for the length in general, a lot of it depends on whether or not you moved your seat pans back. If they are in the stock position then you most likely will want the stock length column.
The wiring on the column is GM, so you will want to adapt from the Ford connectors to the GM connectors, which are provided by Ididit. That way, should you decide to go back to a stock column you can do so with minimal fuss.
Pictures here
1 - 2 of 2 Posts
Join the discussion
Join now to ask and comment!