Lake Erie Mustang Owners Show
Join the discussion
Recommended Reading
-
Header Fit
Vintage Mustang ForumHey guys I have a 67 mustang with a 302 from a 68 and a c6 transmission from (not sure where). Here’s the things, I know a c6 is a bit bigger transmission so I’m not sure which headers to get. Should I go with shortys or long tubes? Anyone recommend any specific ones? Thanks!- 6
- 163
-
firewall insulator
Vintage Mustang ForumI am putting together the wiring and need to get a new firewall insulator as the old one was thrown out. I have the opportunity to buy an ACC one for almost half price, but it will still be around $130. Is it worth the extra money or can i just get a cheap $45 one. I have heard pretty bad things...- 0
- 0
-
331 Stroker Dies - Starts right back up
Vintage Mustang ForumHello Everyone, I'm pulling my hair out at the moment. My 65 mustang seems to have an electrical issue that I can't figure out. I will be driving down the road perfectly normal, and the car will shut off. All accessories still stay on, the ALT light kicks on, but the motor very suddenly...- 9
- 345
-
Comp Numbers 66 289 with Twisted Wedge 170 61cc
Vintage Mustang ForumTrying to do some compression number calcs to see if these heads would be a good fit for my 289. Currently a stock 66 289. Twisted Wedge 170 w/ dual springs and 61cc chambers What's the stock comp #s with factory heads? What would the comp be with the 61cc chambers on the TW? Plans are for a...- 5
- 45
-
cturboaddict · updated
-
MPG concern
Vintage Mustang ForumHi all! I didn't want to hijack the other thread I was looking in so I thought I'd start a new one. As others in that thread stated they are getting at least 20 mpg, but after some calculating I did when I filled up on Monday I found out I'm getting about 11. I don't have a lead foot, but will...- 30
- 481
-
guitarman584 · updated
Join now to ask and comment!